Go to Facebook Page Go to Twitter Page Go to LinkedIn Page

KR101E/M, R6 anti-vandal and RU5208 UHF wiegand reader

Wiegand readers can be used for all terminals and controllers that have a wiegand input and use the standard 26/34-bit wiegand protocol. They work at different frequencies (125khz, mifare, UHF, ...). In case we have a terminal that supports cards/tags at e.g. 125kHz, and it is necessary to switch the system to e.g. mifare technology, you don't have to change the whole terminal. Just connect a wiegand reader that supports mifare technology to the wiegand terminal input.

Also, these readers can be used for e.g. to record IN events from the outside of the entrance, while a terminal can be mounted inside of the building to record the OUT events. In this way, we eliminate the possibility of expensive repairs in the case of mounting the terminal outside if someone damages it. If an electric lock is connected to this system, then it is possible to have a simple system for access control and recording of working hours.


KR101E/M


RFID wiegand reader

The KR101E/M is an external wiegand reader that can be used for all terminals and controllers that have a wiegand input and use the standard 26/34-bit wiegand protocol. Its affordable price makes it an ideal choice for access control and time and attendance systems. Furthermore, it is waterproof, in IP 65 protection and represents a favorable solution for outdoor installation. In combination with the terminal SCR100 it can be used to record IN events, while the terminal SCR100 itself is used to record OUT events. It has LED lights that can indicate allowed (green) or forbidden (red) access. It is easy to connect and install.

Features:

  • Frequency 125KHz (KR101E) / 13.56MHz (KR101M)
  • Reading range: up to 10 cm (125KHz) / up to 5 cm (13.56MHz)
  • Robust and elegant design
  • Easy to install on a metal door frame or on a wall
  • Indoor or outdoor mounting
  • IP65 protection, waterproof
  • LED indicator and buzzer
  • Reverse polarity protection

Specification:

  • Wiegand protocol: 125kHz - 26bit, 13.56MHz - 26/34bit (ISO14443A)
  • Power supply/Current: 6-14V DC / Max. 70mA
  • LED Indicator: 2 color LEDs (Red & Green)
  • Speaker: yes
  • Reading time: <300ms
  • Operating humidity: 10% do 90%
  • Operating temperature: -10 °C do +70 °C
  • Color: Black
  • Material: ABS + PC with texture
  • Dimensions: (LxWxH) 77x43x17 mm
  • Weight: 50g
  • Protection index: IP65

More on this reader can be found in file: more about the KR101 »


R6 anti-vandal metal reader


RFID anti-vandal wiegand reader

R6 is an anti-vandal variant of an external wiegand reader that can also be used for all terminals and controllers that have a wiegand input and use the standard 26/34-bit wiegand protocol. It is waterproof, in IP66 protection and is an ideal solution for outdoor installation. In combination with the SCR100 it can also be used as a plastic KR101E/M wiegand reader for detecting IN and OUT events. It also has LED lights that can indicate allowed (green) or forbidden (red) access. It is resistant to shocks and mechanical damage. Furthermore, it is easy to connect and install (in the same way as the KR101).

Features:

  • Frequency 125KHz (R6-EM), 13.56MHz (R6-MF)
  • Reading range: 3~8 cm
  • Metal housing, anti-vandal
  • Easy to install on a metal door frame or on a wall
  • Indoor or outdoor mounting
  • IP66 protection, waterproof
  • LED indicator and buzzer

Specification:

  • Wiegand protocol: 26~37 bit (default: 26bit)
  • Power supply/Current: 9~24V DC / standby <25mA
  • LED Indicator: 2 color LEDs (Red & Green)
  • Speaker: yes
  • Operating humidity: 10% do 98%
  • Operating temperature: -40 °C do +60 °C
  • Color: Gray
  • Material: metal and ABS
  • Dimensions: (LxWxH) 103x48x19 mm
  • Weight: 200g
  • Protection index: IP66

RU5208 - UHF


UHF reader

A special type of reader with a wiegand interface are UHF RFID readers. These devices use the ultra-high frequency (UHF) band, between 840 MHz and 960 MHz. Their extended reading range compared to standard readers allows one reader to interact with many cards/tags simultaneously, at a very high speed, at a distance of about ten meters. They can be used to quickly record the IN and OUT events of people/cars using UHF cards/stickers or in conjunction with an access control system. By connecting to the terminals for time and attendance, a system can be made where employees are not obliged to present cards to the terminal, but their arrivals and departures are automatically detected. Due to the strong field they generate, we recommend that the input and output be physically separated.

Features:

  • Frequency 865~868Mhz (EU standard), 902~928Mhz (US standard)
  • Reading range: up to 20 m
  • RS232 interface and Wiegand 26bit
  • Power supply with separate adapter
  • High-speed data transfer
  • LED indicator and buzzer
  • Based on Impinj R2000 chip

Specification:

  • Model: CF-RU5208 (Wiegand 26bit) or CF-RU5208T (Wiegand 26bit and TCP/IP interface)
  • Protocol: ISO18000-6B/6C (EPC GEN2)
  • Built-in antenna: 9dbi circular antenna
  • RF power: 30dbm (variable)
  • Reading range: 10~20 m (depending on the type of card/tag)
  • Interface: RS232/WG26/TCP/IP (optional)
  • Power supply/Current: 9V DC / Max. 200mA
  • Operating temperature: -10 °C do +55 °C
  • LED Indicator: 2 color LEDs (Red & Green)
  • Speaker: yes
  • Color: White
  • Material: ABS + PVC plastic
  • Dimensions: (LxWxH) 305x305x70 mm
  • Weight: 2,55 kg
Best-selling
We single out
We recommend
Please, make sure that Viber is installed Chat with us on Viber Please, make sure that WhatsApp is installed Chat with us on WhatsApp